A/C INTERCOM RECORDING CABLE

The IRC0014 series intercom recording cables addresses the problem of attempting to use a standard microphone interface to record a signal intended to drive a 600 ohm aviation headset. The integrated electronic circuitry steps the signal down to levels expected by the recording device, preventing oversaturation of the recording device and thereby eliminating any distortion. 

Additional protection is provided via AC coupling, ensuring that only the audio signal is passed while DC power remains isolated to the respective equipment. At low levels, DC power interference can reveal itself as a high-pitched squeal in the recorded audio. If enough voltage is present, irreparable equipment damage can occur. 

Professional grade metallic connectors are utilized in the make-up of the IRC0017S, providing additional electronic noise shielding not available from low cost plastic parts, ensuring the cleanest low-noise recording possible.

Features

• Record distortion-free aircraft intercom audio.
• Integrated electronic circuitry provides impedance balancing between aircraft intercom system and microphone interface of recording device, applying voltage step-down to prevent distortion of recorded sound.
• AC coupling provides protection, preventing DC electrical interference between the aircraft intercom and the recording device(such as microphone power).
• 3.5mm (1/8") Stereo plug to recording device.
• Made from quality components - no cheaply made plastic parts.
• Length: 6ft.
• Record crystal-clear intercom audio with your video camera or voice recorder.
• Student Pilots: Not sure what your CFI was blabbing about while you were trying to flare? No problem. Go back and review it after the flight from the wide comfort of your recliner.
• Travelers: Capture crisp audio with your aerial tour videos.
• The mono to stereo cable provides maximum compatibility between combinations of stereo and mono intercoms and recording devices.