Katalog nur für gewerbliche Kunden. Alle Preise zzgl. MwSt.[Preise inklusive MwSt zeigen]

Shipping country set to Germany

POLY-POXY QUART KIT

Part number:

01-07905

81.32 EUR

excl. VAT, excl. shipping

Available Quantities:

unknown

Hazardous Materials!

Description:

Poly Epoxy is a true high-performance epoxy resin with unmatched tensile, compressive, and flex strengths. It also has unbeatable peel, shear, and fatigue resistance, as well as impact strength and fracture behavior. Its great for wings, canards, fuselages, tail feathers, and landing gear.

Use it in molds or moldless construction. It parts easily and works beautifully in vacuum bagging. (Avoid silicone-treated peel ply.) It has TWO cure phases, while all other resins-epoxy, polyester, or vinylester-have just one. The two phases occur all by themselves during the curing process. The resulting bond is tougher and stronger than any other.

Additonal Tech Data

POLY EPOXY TECHNICAL DATA
Mechanical Properties:	w/Post Cure	w/o Post Cure
Tensile Strength, psi	9600	8800
Elongation at Break, %	7.5	3.6
Tensile Modulus, psi	470,000	460,000
Flexural Strength, psi	19,000	14,500
Flexural Modulus, psi	515,000	500,000
Compressive Strength, psi	32,000	33,000
Shore D Hardness	82	70
Glass Transition Temp., °C	72	62
Heat Distortion Temp., °C	64	50
Water Immersion Weight Gain, % (140 °F, 30 days)	2.8	2.9
Rheology: Mixing Ratio:3 parts Resin to 1 part Converter by Weight 10 parts Resin to 4 parts Converter by Volume

Kinetics: Pot Life, 100 grams .............. 105 mins 1 quart......................75 mins Mold Open Time.......................3-4 hrs Tack Free Time......... 5-6 hrs

MSDS (PDF)

Q+A:

Can I get the value of density of your poly epoxy?
> We have added to the "Tech Data" tab on this web page. It now includes the density information.

Would you have a copy of the MSDS report for this Poly Epoxy material?
We have added the MSDS to the "Documents" tab of this web page for your review.

Poly Epoxy resin has solidified in the can. Cross linker is fine. How should I re-melt the resin?
Poly Epoxy resin can become a cloudy white color, and possibly crystallize. This is not uncommon, and the material is still in good condition. The resin will need to be heated up to about 120 degrees or until clear, and stirred before use. Once clear, it is as good as new. To help prevent this from happening again, store in a warm place, approximately 77 degrees, and keep tightly sealed.

Is there any information regarding room temperature cure time? I am not planning on post curing the part.
24 hour cure at room temp, 77*F, but longer in colder conditions. 7 day full cure.

Description	Part Number
POLY-POXY QUART KIT	01-07905
POLY-POXY 1-1/4 GAL KIT	01-07906
POLY-POXY RESIN GALLON	01-07934
POLY-POXY HARDENER QUART	01-07935

Unit	QT
Hazardous	Yes
Oversize	No
Weight	1.361 kg

This part is included in the following categories:

Start > composite materials > epoxy > poly epoxy > poly epoxy structural epoxy system
Start > composite materials > resin > poly epoxy structural epoxy system
Start > covering supplies > epoxy > poly epoxy > poly epoxy structural epoxy system

Cart

Shopping cart is empty

Subtotal excl. VAT:0 EUR

My pages	Customer support	About us
> My settings	> FAQ	> Green Initiative
> My orders	> AGB	> Shipping
	> Core	> Bargain bin
		> About Us
		> Imprint