Katalog nur für gewerbliche Kunden. Alle Preise zzgl. MwSt.[Preise inklusive MwSt zeigen]

Shipping country set to Germany

MGL AVIONICS MAP-1 MANIFOLD PRESSURE INDICATOR

Instruments_Manifold-Pressure-Gauges_MGL-Avionics_MGL-AVIONICS-MAP-1-MANIFOLD-PRESSURE-INDICATOR

The MAP-1 is a 2.25” instrument which can measure pressures in the range from 0.25 bars (3.6 PSI) to 2.5 bars (36.2 PSI) as well as simultaneously display RPM from a universal RPM input.

Pressure can be displayed in millibar, bar, PSI, kg/cm2, inches of Mercury, millimeters of Mercury, kilopascal (KPA) or atmospheres. The pressure display is also available in the form of an analog bar graph with user selectable sensitivity if the RPM input is not needed. The MAP-1 is primarily intended as a manifold pressure gauge, however, due to the universal nature of this accurate instrument it can be used for many other applications as well.

In addition the MAP-1 provides a 24 entry automatic flight log that stores the duration of each of the last 24 flights. It also has a Hobbs meter (can be set to the current engine time) which is password protected, an engine running timer/flight timer and a programmable maintenance timer to schedule routine engine maintenance.

The MAP-1 also features a programmable low/high alarm for pressure as well as for RPM and it also records the maximum Pressure and RPM reached in permanent memory.

Typical applications include:
Engine manifold pressure, turbo boost pressure, barometer, fuel or oil pressure gauge (with additional isolation kit), pressure reference or airfoil research and testing

Download the MAP-1 Manual PDF

MGL Offers a Three-Year Warranty

MGL Avionics offers a three-year limited warranty on all EFIS and single-instrument products in its product line. This warranty also applies to instruments purchased prior to thier announcement.
All MGL products are covered for three years against manufacturing or product defects, and the units will be repaired or replaced as necessary at no charge. One exclusion is the LCD screen, which, if damaged by the customer, will not be replaced free of charge.

Features

Universal pressure and RPM indicator
Can Measures RPM from 0 to 20000 RPM
Can measure pressures in the range of 0.25 bars (3.6 PSI) to 2.5 bars (36.2 PSI)
Pressure can be displayed in millibar, bar, PSI, kg/cm2, inches of Mercury, millimeters of Mercury, kilopascal (KPA) or atmospheres
Contains a programmable low/high Pressure and RPM alarm
Records maximum pressure and RPM reached in permanent memory
Includes a 24 entry automatic flight log
Includes a settable Hobbs meter (password protected) and an engine running timer/flight timer
Contains a programmable maintenance timer for scheduled routine engine maintenance
Scalable analog pressure bar graph

Specifications

Operating Temperature Range: -10ºC to 50ºC (14ºF to 122ºF)
Storage Temperature Range: -20ºC to 80ºC (-4ºF to 176ºF)
Humidity: <85% non-condensing
Power Supply: 8 to 30Vdc SMPS (switch mode power supply) with built in 33V over voltage and reverse voltage protection
Current Consumption: Approx. 43mA @ 13.8V (backlight on) 13mA @13.8V (backlight off)
Display: 114x64 graphics LCD display. Contrast and backlight is user configurable,green/yellow backlight
ADC: 12bit over sampled successive approximationg
Enclosure: 2 1/4” ABS, black in color, front or rear mounting
Weight: Approx. 120 grams
Alarm contact current rating: Open collector transistor switch to ground. Maximum rating 0.5A DC
Non-volatile memory storage: 100000 write cycles
Pressure range: Absolute, 0.25 bars to 2.5 bars
Maximum error over full range: Less than 1% of full scale when operated at calibration temperature
Never exceed pressure: 5 bars
Rev counter input: Range: 0-20000 RPM.; Minimum signal for stable display: 5Vpp.;Fully A/C coupled, maximum voltage +/- 40V.;RF noise filter plus Schmitt-trigger based input