Language:
Katalog nur für gewerbliche Kunden. Alle Preise zzgl. MwSt.[Preise inklusive MwSt zeigen]
Shipping country set to Germany

Composite Aircraft

Avionics_Antennas_Composite-Aircraft

Composite Aircraft

Here is a new series of aircraft antennas specifically designed to be used without a ground plane. This means that composite aircraft and fabric covered aircraft can now have their antennas mounted totally within the structure. These antennas are designed using the latest engineering technology. Laboratory measurements show them to have better electrical characteristics than currently available products. The unanimous reports from pilots who have been using them confirm that they out perform everything now available on the market. One antenna model works for communication, navigation, and for ELT (Three antennas in the aircraft, but all the same design), and this design is tolerant to installation errors. They will work in metal airframes when a plastic or fiberglass wing tip or similar plastic component is available to provide the mounting structure. The VHF antennas, 5T and 5I, differ only in the location of the BNC connection. The 5T is configured to allow the coax cable to be routed flat along the mounting surface of the airframe. This antenna model would be appropriate for a composite aircraft where the antenna would be mounted in the fuselage or fin and the coax would be close to the skin and be attached periodically for strain relief. In either case, the antenna can be used as a retrofit on in service aircraft or in new installations. The 5I series has the BNC connection positioned so that the coax cable would route out and away from the antenna mounting surface. This configuration is offered for antenna installations such as wing tips of fabric aircraft. If the antenna is mounted on the inside of the tip, the coax route is directly inward toward the wing root and the BNC connection is located near the spar to provide support for the cable. Both antennas are identical in their electrical performance.

Features

  • Inside mounting.
  • Use w/ composite skins.
  • Use with fabric covered airframes.
  • Glue or bond to the airframe. Light weight.
  • Wide service temperature,
  • No ground plane corrosion, Mount anywhere inside, Maximum range with low VSWR.
  • Model VHF series designed for comm or nav or ELT.
  • Guaranteed against failure for the life of the airframe.
  • Adapts to existing airframes or to in process construction.
  • Glue or bond to the airframe. Light weight. Wide service temperature, No ground plane corrosion, Mount anywhere inside, Maximum range with low VSWR. Model VHF series designed for comm or nav or ELT. Guaranteed against failure for the life of the airframe. Adapts to existing airframes or to in process construction.


= Available today
= Available in 3-10 days
= Available in 13 days
= Unknown (3 weeks or more)
VHF-5I NAV/COM ANTENNA11-04261VHF-5I NAV/COM ANTENNA153.34 EURDelivery in 13 days
VHF-5T NAV/COM ANTENNA11-04262VHF-5T NAV/COM ANTENNA153.38 EURDelivery in 13 days
L2 XPDR ANTENNA11-04212L2 XPDR ANTENNA128.22 EURplease call
Log in
Email:
Password:

Shopping cart is empty
Visit Our Facebook Fan Page
Visit Our Instagram Account
Call us at +49 7634 9057700 from 08:00 to 13:00 CET
Email: info@aircraftspruce.eu Phone: +49 76349057700 (monday-friday 08:00-13:00 CET)