AEROSPACE LOGIC CT1-F NON CERT

Now you can have everything in one place! The CT1 Clock and Outside Air Temperature instrument includes a feature-rich aircraft chronograph with constant viewable Outside Air Temperature - all in one 2 1/4" mount instrument. For experimental aircraft.

Programmable Features - CT1 allows you to configure the instrument just the way you need it. All clock functions are available in both 12 and 24 hour format with instant indication of the current operating format. Local time is calculated as an offset from UTC. Just set your offset. Programmable to 23 hours 30 minutes either side of the date line.

This part has no FAA Approval.

Features

• MultiFunction Flight Timer- The flight timer is activated as soon as power is applied to the instrument to provide you with the exact run time. Want to use it as an “air time” timer? Just reset it on your take-off roll or wheels up point. But there is more: CT1’s flight timer also has a second level interval timer. Use it for any interval checkpoint reminders such as fuel tank switching and checkpoint expectations. Simply set the programmable interval period from 1 minute to 99 minutes and 59 seconds. CT1 will alert you each time the interval is reached.
• Down Timer - Preset the down timer for your predefined run time and continue with your cockpit tasks. CT1 retains your setting even though you utilize its other functions. When you are ready to start the timer simply go back to the down timer selection and select “run”. Using CT1 you can preset your approach times and reporting points, then start the timer at the exact intercept point. Five seconds before the timeout of the timer CT1 will alert you and automatically display the final countdown to your preset time.
• Outside Air Temperature - Just as if you had a separate OAT instrument you will always have the temperature displayed. No compromise on information visibility when you use CT1. Available in ºF or ºC.
• Hi-Tech Temperature Sensor - CT1 uses the latest temperature sensor system. There are no induced errors due to cable length or placement. The temperature sensor uses a monolithic semiconductor with embedded signal conditioning -all built right into the sensor. With this technology the temperature is measured, converted and processed right inside the temperature probe. The exact data is then transmitted to the instrument without any compromise.
• TSO & STC Certificate pending (Oct 2005) – Both TSO (C43) and STC certifications are pending for CT1. All other clocks are considered a minor alteration by the FAA. However with the inclusion of the Outside Air Temperature function CT1 will become the only TSO’d and STC’d clock in the world. Certified to work in YOUR aircraft under the most demanding of conditions!

Specifications

• Dimensions: 2.45" X 2.45" X 1.6"
• Weight: 8oz.
• Viewing Area: 2"
• Operating Ranges: 12/24 hour UTC clock
• Accuracy: Clock within 2 minutes per month
• Resolution: 0 to 99.5
• Operating Temperature (Per DO-160(D)) -15 C
• Certifications Pending: DO-160(D), DO-178(B), TSO C43, STC for ~700 aircraft
• Operating Voltage: 6V-40Volt DC continuous
• Power Consumption: 275mA Max
• Sensor Technology: Monolithic solid state temperature sensor; Quartz crystal clock oscillator