2600-10W CAMLOC CAD WING STUD

Part number:

2600-10W

40.35 EUR

incl. 19% VAT, excl. shipping

Will ship tomorrow if you order before Monday 20 May 14:00. This information is valid for up to 3 PC

Available Quantities:

In 1 day:	3 PC
In 10 days:	2 PC

Description:

Type	Description	Part No.
Cad Plated	Camloc Wing Stud	2600-2W
Cad Plated	Camloc Wing Stud	2600-3W
Cad Plated	Camloc Wing Stud	2600-4W
Cad Plated	Camloc Wing Stud	2600-5W
Cad Plated	Camloc Wing Stud	2600-6W
Cad Plated	Camloc Wing Stud	2600-7W
Cad Plated	Camloc Wing Stud	2600-8W
Cad Plated	Camloc Wing Stud	2600-9W
Cad Plated	Camloc Wing Stud	2600-10W
Cad Plated	Camloc Wing Stud	2600-11W
Cad Plated	Camloc Wing Stud	2600-12W
Cad Plated	Camloc Wing Stud	2600-14W

2600/2700 STUD LENGTH SELECTION
Total material thickness G consists of the thickness of all materials to be fastened. This must include the thickness of the material P to which the stud assembly is attached, the material F to which the receptacle is attached plus gaskets (if used) and allowance for paint or other protective finishes. If the total thickness is near the upper limit of the stud grip range, the next longer stud should be used. This will still maintain positive locking of the fastener under vibration.

P (panel thickness)..................... .062
F (frame thickness................... + .062
GRIP (total thickness).............. = .124

STUD SELECTION TABLE Using 212-12 Receptacle
Total Grip Thickness	Use 2600	Use 2700
.021-.059	2600-1	2700-1
.060-.089	2600-2	2700-2
.090-.119	2600-3	2700-3
.120-.149	2600-4	2700-4
.150-.179	2600-5	2700-5
.180-.209	2600-6	2700-6
.210-.239	2600-7	2700-7
.240-.269	2600-8	2700-8
.270-.299	2600-9	2700-9
.300-.329	2600-10	2700-10
.330-359	2600-11	2700-11
.360-389	2600-12	2700-12
.390-.419	2600-13	2700-13
.420-.449	2600-14	2700-14
*4002-G grommet requires .090" minimum grip.

2600, 2700 SERIES RETAINING WASHER
Retaining washers are required for studs of -5 length or greater. Use split washer 2600- SW2 where it is desirable to have the stud fall away for minimum internal projection. Use internal tooth washer 2600-LW where it is desirable to retain the stud assembly rigidly.

2600, 2700 SERIES RETAINING WASHER

Rivet Holes	2600, 2700 Series Part No.
Plain	212-12N
Countersunk	212-12ND

Unit	PC
Hazardous	No
Oversize	No
Weight	0.001 kg
Alternative P/N	1126010-10

This part is included in the following categories:

Start > hardware > fasteners > camloc > camloc 2600 wing studs

Cart

Shopping cart is empty

Subtotal incl. VAT:0 EUR

My pages	Customer support	About us
> My settings	> FAQ	> Green Initiative
> My orders	> AGB	> Shipping
	> Core	> Bargain bin
		> About Us
		> Imprint