ULTRAPROP I 3-BLADE LEFT HAND KIT

Part number:

UP103L

960.72 EUR

incl. 19% VAT, excl. shipping

Available Quantities:

unknown

Description:

Select 2, 3, 4, 5, or 6 blade props. Each blade is moulded from a high strength glass-reinforced composite. 59" maximum diameter. One set of pitch blocks included, additional blocks available in 1° increments. Universal hubs made from high strength composite. Accommodates most popular bolt-mounting patterns.

Each prop comes complete with all assembly hardware, and complete instructions. Mounting hardware not included. Black blades and hub are beautifully complemented by high impact polyester spinner (SOLD SEPARATLEY - PN 05-04654).

The blades can be trimmed to any lesser diameter (not restricted to 48 inch). The ultra-prop is very resistant to damage caused by foreign objects, and exhibits very little distortion under power. Over 16,000 Ultra-Props have been sold!

Propeller Recommendations

by Lee 11/04/2013
I bought a 3 blade ultra prop to replace a 60 x 30 wood prop and it did not perform nearly as well as the wood prop. I used the recommended pitch blocks and my engine over revved. I have tried higher pitch blocks with marginally better performance. I am going to switch back to a wood prop.

by Gib 12/13/2013
I started with a 60X28 wood prop on a Challenger with a 277. Grossly over-revved on takeoff. Changed to a 4 bladed UP with 11 degree pitch. Not quite enough! Went to 13 pitch. Now climbs like a home-sick angel! Just remember, the chart is for STATIC thrust, and you have to add some pitch to make it work while moving. I now have 2 Challengers with UPs on them and am building a third which will certainly have one on it. It doesn't take much power to drive a 1/32 inch leading edge thru the air! Only 4 stars due to no helix on the blade. Make sure you have the correct PSRU ratio!

by Lee 06/11/2014
I had earlier given this prop a bad review but have since did a little experimenting with pitch blocks and tightened the belts on the reduction drive and give this prop 5 stars. Climb increased as did cruise speed. I would recommend this prop.

Q+A

What is total weight of 2 blade Ultra-Prop?
The weight of the 2 blade Ultra-Prop is approx 5 lbs.

Unit	EA
Hazardous	No
Oversize	No
Weight	6.350 kg

This part is included in the following categories:

Start > airframe parts > propellers > applications > composite > ultra-prop

Cart

Shopping cart is empty

Subtotal incl. VAT:0 EUR

My pages	Customer support	About us
> My settings	> FAQ	> Green Initiative
> My orders	> AGB	> Shipping
	> Core	> Bargain bin
		> About Us
		> Imprint