Avionics
Batteries
Books & Videos
Charts
Composite Materials
Covering Supplies
Electrical
ELTs
Engine Parts
Flight Training
Flight Planning
Gifts
GPS
Hardware
Headsets
Instruments
Landing Gear
Metals & Plastics
Pilot Supplies
Radios
Tires & Tubes
Tools
Wood Products
Kits & Plans
FBO Supplies
Liqui Moly AERO
Catalogs
MS21252-3Rs Turnbuckle Fork End
| Part number: | MS21252-3RS |
| In 7 days: | 53 EA |
Clip-Locking Turnbuckles utilize 2 locking clips instead of lock-wire
for safety. The turnbuckle barrel and terminals are slotted lengthwise
to accommodate the locking clips. After the proper cable tension is
reached the barrel slots are aligned with the terminal slots and the clips
are inserted. The curved ends of the locking clips expand and latch
in the vertical slot in the center of the barrel. Build up MS turnbuckle
as sem blies, similar to the AN assemblies listed on the preceding page,
by selecting a turnbuckle barrel, 2 end fittings and 2 clips from the components
listed in the Table below. The price of the complete as sem bly
is the sum of the prices shown for the components.
Example: An MS
turnbuckle assembly for 3/32" dia. cable, with fork end and pin eye
consists of:
-
1 MS21251-B3S Barrel
1 MS21252-3LS Fork End
1 MS21254-3RS Pin Eye End
2 MS21256-1 Clips
| Turnbuckle Component |
Part Number | Cable Dia. |
Thread Size |
Min Breaking Strength |
| Barrel (Supercedes AN155) | MS21251-B2S | 1/16" | 6-40 | 800 |
| -- | MS21251-B3S | 3/32" | 10-32 | 1600 |
| -- | MS21251-B5S | 5/32" | 1/4-28 | 3200 |
| -- | MS21251-B5L | 5/32" | 1/4-28 | 3200 |
| Fork Ends (Supercedes AN161) | MS21252-2RS | 1/16" | 6-40 | 800 |
| -- | MS21252-2LS | -- | -- | -- |
| -- | MS21252-3RS | 3/32" | 10-32 | 1600 |
| -- | MS21252-3LS | -- | -- | -- |
| -- | MS21252-3RL | -- | -- | -- |
| -- | MS21252-4LL | 1/8" | 1/4-28 | -- |
| -- | MS21252-4LS | -- | -- | -- |
| -- | MS21252-5RS | 1/8", 5/32" | 1/4-28 | 3200 |
| -- | MS21252-5LS | -- | -- | -- |
| Pin Eye End (Supercedes AN165) | MS21254-2RS | 1/16" | 6-40 | 800 |
| -- | MS21254-2LS | -- | -- | -- |
| -- | MS21254-3RS | 3/32" | 10-32 | 1600 |
| -- | MS21254-3LS | -- | -- | -- |
| -- | MS21254-5RS | 1/8", 5/32" | 1/4-28 | 3200 |
| -- | MS21254-5LS | -- | -- | -- |
| Cable Eye (Supercedes AN170) | MS21255-2RS | 1/16" | 6-40 | 800 |
| -- | MS21255-2LS | -- | -- | -- |
| -- | MS21255-3RS | 3/32" | 10-32 | 1600 |
| -- | MS21255-C3RS | -- | -- | -- |
| -- | MS21255-3LS | -- | -- | -- |
| -- | MS21255-5RS | 1/8", 5/32" | 1/4-28 | 3200 |
| -- | MS21255-5LS | -- | -- | -- |
| Cable Swage End (Supercedes AN669) | MS21260-S2RH | 1/16" | 6-40 | 480 |
| -- | MS21260-S2LH | -- | -- | -- |
| -- | MS21260-S3RH | 3/32" | 10-32 | 920 |
| -- | MS21260-S3LH | -- | -- | -- |
| -- | MS21260-S4RH | 1/8" | 1/4-28 | 2000 |
| -- | MS21260-S4LH | -- | -- | -- |
| -- | MS21260-S5RH | 5/32" | 1/4-28 | 2800 |
| -- | MS21260-S5LH | -- | -- | -- |
| Clip | MS21256-1 | -- | -- | -- |
| -- | MS21256-2 | -- | -- | -- |
Q+A
I am ordering 6 turnbuckle barrels P/N: MS 21251-B5S. My questions are:
1 - Does this barrel take the clips?
2 - If it does take the clips - Which clips, since you have 2 part numbers listed?
Yes, the MS21251-B5S uses the clips. The S at the end of the part number indicates it is a short barrel, so you would need the MS21256-1 clips.
| Unit | EA |
| Hazardous | No |
| Oversize | No |
| Weight | 0.003 kg |
| Manufacturer | |
| Manufacturer P/N | |
| GTIN | |
| Core Charge | Yes (add to cart to see price) |
| 110V device | Yes |
 | Call us at +49 7634 9057700 from 08:00 to 13:00 CET |
