Search
Categories
Airframe Parts
Avionics
Batteries
Books & Videos
Charts
Composite Materials
Covering Supplies
Electrical
ELTs
Engine Parts
Flight Training
Flight Planning
Gifts
GPS
Hardware
Headsets
Instruments
Landing Gear
Metals & Plastics
Pilot Supplies
Radios
Tires & Tubes
Tools
Wood Products
Kits & Plans
FBO Supplies
Liqui Moly AERO
Catalogs
Avionics
Batteries
Books & Videos
Charts
Composite Materials
Covering Supplies
Electrical
ELTs
Engine Parts
Flight Training
Flight Planning
Gifts
GPS
Hardware
Headsets
Instruments
Landing Gear
Metals & Plastics
Pilot Supplies
Radios
Tires & Tubes
Tools
Wood Products
Kits & Plans
FBO Supplies
Liqui Moly AERO
Catalogs
HOLIDAY ANNOUNCEMENT: 01 May is Labour Day, a German national holiday. Our business will remain closed throughout the day, and will reopen on 02 May at 08:00.
2600-10W Camloc Cadmium Wing Stud
| Part number: | 2600-10W |
39.01 EUR
incl. 19% VAT, excl. shipping
Will ship today if you order before 14:00. This information is valid for up to 1 PC
Available Quantities:
| Today: | 1 PC |
| In 7 days: | 6 PC |
Description:
| Type | Description | Part No. |
| Cad Plated | Camloc Wing Stud | 2600-2W |
| Cad Plated | Camloc Wing Stud | 2600-3W |
| Cad Plated | Camloc Wing Stud | 2600-4W |
| Cad Plated | Camloc Wing Stud | 2600-5W |
| Cad Plated | Camloc Wing Stud | 2600-6W |
| Cad Plated | Camloc Wing Stud | 2600-7W |
| Cad Plated | Camloc Wing Stud | 2600-8W |
| Cad Plated | Camloc Wing Stud | 2600-9W |
| Cad Plated | Camloc Wing Stud | 2600-10W |
| Cad Plated | Camloc Wing Stud | 2600-11W |
| Cad Plated | Camloc Wing Stud | 2600-12W |
| Cad Plated | Camloc Wing Stud | 2600-14W |
2600/2700 STUD LENGTH SELECTION
Total material thickness G consists of the thickness of all materials to be fastened. This must include the thickness of the material P to which the stud assembly is attached, the material F to which the receptacle is attached plus gaskets (if used) and allowance for paint or other protective finishes. If the total thickness is near the upper limit of the stud grip range, the next longer stud should be used. This will still maintain positive locking of the fastener under vibration.
P (panel thickness)..................... .062
F (frame thickness................... + .062
GRIP (total thickness).............. = .124
|
Using 212-12 Receptacle |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| *4002-G grommet requires .090" minimum grip. | ||
2600, 2700 SERIES RETAINING WASHER
Retaining washers are required for studs of -5 length or greater. Use split washer 2600- SW2 where it is desirable to have the stud fall away for minimum internal projection. Use internal tooth washer 2600-LW where it is desirable to retain the stud assembly rigidly.
2600, 2700 SERIES RETAINING WASHER
Rivet Holes |
2600, 2700 Series Part No. |
Plain |
212-12N |
Countersunk |
212-12ND |
| Unit | PC |
| Hazardous | No |
| Oversize | No |
| Weight | 0.001 kg |
| Manufacturer | |
| Manufacturer P/N | |
| GTIN | |
| Core Charge | Yes (add to cart to see price) |
| 110V device | Yes |
This part is included in the following categories:
Log in
Shopping cart is empty
Subtotal incl. VAT:0 EUR
Latest News
 | Call us at +49 7634 9057700 from 08:00 to 13:00 CET |
