Search
Categories
Airframe Parts
Avionics
Batteries
Books & Videos
Charts
Composite Materials
Covering Supplies
Electrical
ELTs
Engine Parts
Flight Training
Flight Planning
Gifts
GPS
Hardware
Headsets
Instruments
Landing Gear
Metals & Plastics
Pilot Supplies
Radios
Tires & Tubes
Tools
Wood Products
Kits & Plans
FBO Supplies
Liqui Moly AERO
Catalogs
Avionics
Batteries
Books & Videos
Charts
Composite Materials
Covering Supplies
Electrical
ELTs
Engine Parts
Flight Training
Flight Planning
Gifts
GPS
Hardware
Headsets
Instruments
Landing Gear
Metals & Plastics
Pilot Supplies
Radios
Tires & Tubes
Tools
Wood Products
Kits & Plans
FBO Supplies
Liqui Moly AERO
Catalogs
Katalog nur für gewerbliche Kunden. Alle Preise zzgl. MwSt.[Preise inklusive MwSt zeigen]
Shipping country set to GermanyTINNERMAN NUT A1784-6Z1D
| Part number: | A1784-6Z-1D |
0.40 EUR
excl. VAT, excl. shipping
Expected shipping date is Monday 22 April if you order before 14:00 Monday 22 April. This information is valid for up to 25 PC
Available Quantities:
| In 2 days: | 25 PC |
| In 11 days: | 4770 PC |
Description:
Snaps over edge of panels or into center hole locations. Holds itself in place for blind assembly. "Floats" free for easy hole alignment.
| Tinnerman No. | Screw Size | Part Number |
| A1784-6Z-1D | #6 | A1784-6Z-1D |
| A1785-6Z-1D | #6 | 04-00362 |
| A1789-8Z-1D | #8 | 04-00364 |
| A1787-8Z-1D | #8 | 04-00365 |
| A1788-8Z-1D | #8 | 04-00366 |
| A1348-8Z-1D | #8 | 04-00367 |
| A1786-8Z-1D | #8 | 04-00368 |
| A1787-10Z-1D | #10 | A1787-10Z-1D |
| A1758-10Z-1D | #10 | 04-00370 |
HOW TO APPLY SPEED NUT FASTENERS
FLAT TYPE
Fastener is positioned over screw clearance hole with screw-engaging prongs pointing up or outward. Screw is started into nut by hand from the underside. See picture 5.
Screw can be power-driven into locked position (when base arch of fastener is flat) or a hand screw driver can be used. No wrench is required, finger pressure will prevent it from turning. See picture 6.
"U" TYPE
Push into position with thumb until extrusion on lower leg snaps into screw hole. The fastener "floats" in screw-receiving position to correct for normal misalignment in panel mounting holes. See picture 7.
Place second panel in position and drive screw. Access to opposite side is unnecessary. Flush mounting can be made by embossing either panel. See picture 8.
Q+A
With reference to column G panel hole diameter measurement under spec tab. What exact dimension is that referencing? Regards, Nic
We have added a new specification chart both above the product listing in the table picture 4. It references each of the dimensions for clearly. G is a minimum diameter.
| Unit | PC |
| Hazardous | No |
| Oversize | No |
| Weight | 0.001 kg |
| Alternative P/N | 07124-25 |
This part is included in the following categories:
Log in
Shopping cart is empty
Subtotal excl. VAT:0 EUR
Latest News
 | Call us at +49 7634 9057700 from 08:00 to 13:00 CET |
