Katalog nur für gewerbliche Kunden. Alle Preise zzgl. MwSt.[Preise inklusive MwSt zeigen]

Shipping country set to Germany

AN3C-3 SS DRILLED BOLT

Part number:

AN3C-3

1.00 EUR

excl. VAT, excl. shipping

Expected shipping date is Wednesday 01 May if you order before 16:00 Wednesday 24 April. This information is valid for up to 10 PC

Available Quantities:

In 8 days:

10 PC

Description:

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground and threaded after heat treatment. Minimum tensile strength 125,000 PSI. Cadmium plated per specification QQ-P-416A, Type II, Class 3. Available with shank drilled for cotter pin or undrilled for stop nut application, and with or without drilled head for safety wire. Specify bolts to have undrilled shank by adding letter "A" after the dash number. For bolts with drilled head add letter "H" after the AN number. (AN3H-15) See illustrated examples. The length of AN aircraft bolts is measured from under the head to the end of the shank. The "grip" is the unthreaded portion of the shank. See table for conversion of length and/or grip to proper AN callout. "C" stands for stainless. Others are cadmium plated.

Note: Drilled bolts listed above are drilled shank only.

AN3(10-32)
Cadmiun
Drilled

AN3(10-32)
Cadmiun
Undrilled

AN3C(10-32)
Stainless
Drilled

AN3C(10-32)
Stainless
Undrilled

Dash No.	Nominal Length	Grip Length
-3	15/32	1/16
-4	17/32	1/8
-5	21/32	1/4
-6	25/32	3/8
-7	29/32	1/2
-10	1-1/32	5/8
-11	1-5/32	3/4
-12	1-9/32	7/8
-13	1-13/32	1
-14	1-17/32	1-1/8
-15	1-21/32	1-1/4
-16	1-25/32	1-3/8
-17	1-29/32	1-1/2
-20	2-1/32	1-5/8
-21	2-5/32	1-3/4
-22	2-9/32	1-7/8
-23	2-13/32	2
-24	2-17/32	2-1/8
-25	2-21/32	2-1/4
-25 New Surplus	2-21/32	2-1/4
-26	2-25/32	2-3/8
-27	2-29/32	2-1/2
-30	3-1/32	2-5/8
-31	3-5/32	2-3/4
-32	3-9/32	2-7/8
-33	3-13/32	3
-34	3-17/32	3-1/8
-35	3-21/32	3-1/4
-36	3-25/32	3-3/8
-37	3-29/32	3-1/2
-37 New Surplus	3-29/32	3-1/2
-40	4-1/32	3-5/8
-41	4-5/32	3-3/4
-42	4-9/32	3-7/8
-43	4-13/32	4
-44	4-17/32	4-1/8
-45	4-21/32	4-1/4
-46	4-25/32	4-3/8
-47	4-29/32	4-1/2
-50	5-1/32	4-5/8
-51	5-5/32	4-3/4
-52	5-9/32	4-7/8
-54	5-17/32	5-1/8
-55	5-21/32	5-1/4
-56	5-25/32	5-3/8
-57	5-29/32	5-1/2
-60	6-1/32	5-5/8

Q+A

Which nut do I order for AN3-4A?
AN3 bolts use AN365-1032A (Cad Plated) or AN365C-1032 (Stainless) for locknuts and AN310-3 for castle nuts.

Are the stainless bolts (AN3C) the same tensile strength as the cad plated ones?
The tech data sheet does not list a separate tensile strength for corrosion-resistant steel bolts. That would indicate they would be rated the same per the TDS.

Unit	PC
Hazardous	No
Oversize	No
Weight	0.002 kg

This part is included in the following categories:

Start > hardware > bolts > an3 bolts

Cart

Shopping cart is empty

Subtotal excl. VAT:0 EUR

My pages	Customer support	About us
> My settings	> FAQ	> Green Initiative
> My orders	> AGB	> Shipping
	> Core	> Bargain bin
		> About Us
		> Imprint